Digitech Rp50 Patches Manual

User guide • Read online or download PDF • DigiTech RP80 User Manual • DigiTech Musical Instruments.

• MODELING GUITAR PROCESSOR Owner's Manual. • Warning For your protection, please read the following: Water and Moisture: Appliances should not be used near water (e.g. Near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.) Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

• Vice-President of Engineering 8760 S. Sandy Parkway Sandy, Utah 84070, USA Date: January 2, 2009 European Contact: Your local DigiTech Sales and Service Office or Harman Music Group 8760 South Sandy Parkway Sandy, Utah 84070 USA Ph: (801) 566-8800 Fax: (801) 568-7583. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control. • If anything is missing, contact the factory at once. How To Remove Trial Programs Installation Date. Please help us become acquainted with you and your needs by completing your warranty card or registering online at It is your safeguard should a problem arise with your RP55.

• The Front Panel 1. Footswitches - These 2 Footswitches are used to select presets, access the Tuner, or bypass the RP55. The Up Footswitch increments, and the Down Footswitch decrements through the presets.

Start Orb Changer For Windows 7 there. Pressing both Footswitches simultaneously bypasses the selected preset. Pressing and holding both Footswitches accesses the Tuner. Value Buttons - The Value Buttons perform various functions depending on which mode is selected.

In Play mode, these buttons control RP55’s Master Level. In Edit mode, these buttons adjust the selected effect. These buttons also change the Pattern, Tempo, and Level of the Drum machine when it is turned on. When the Tuner is enabled, these buttons select the tuning reference. • Global Cabinet Modeling.) 3. Control In - Connect a passive volume pedal to this jack to control Volume, Wah, and Whammy™ in the RP55.

Power Input - Connect only the optional DigiTech PS200R power supply to this jack. • Making Connections There are several different connection options available when using the RP55. The following diagrams show the connections for some of these options. Before connecting the RP55, make sure that the power to your amplifier is turned off, and the power to the RP55 is disconnected. • Stereo Operation For stereo operation connect the guitar to the Input of the RP55. Connect a TRS stereo “Y” cord or a pair of stereo headphones to the RP55’s Output. When using a “Y” cord, connect one end of the “Y” cord to the input of one amplifier or channel of a mixer.

Connect the second end of the “Y”. • Applying Power There are two options for powering the RP55: battery power, and the optional PS200R DC power supply. Before applying power to anything, set your amp(s) to a clean tone and set the tone controls to a flat EQ response (on most amps, this would be 0 or 5 on the tone controls). Battery Power The RP55 can be run for more than 15 hours on 6 AA batteries. • Connecting a cable to the Input applies power to the RP55. Disconnecting your instrument from the Input of the RP55 disconnects the battery power. Turn your amplifier(s) on and adjust the volume(s) to a normal playing level.

To prolong the battery life, disconnect your instrument from the RP55’s Input when not in use. • Tuner The Tuner in the RP55 lets you quickly tune or check the tuning of your guitar. Enter the Tuner by pressing and holding both Footswitches simultaneously. The tu briefly displays indicating that you are in Tuner mode. To begin tuning, play a note on your guitar (the neck pickup usually works best). • tuner mode by pressing either Footswitch. The tuning reference is retained when the unit is turned off.